Redox EVO 120A Speed Controller - 1 pc

Universal brushless speed controller Redox EVO 120A is designed for use in aircraft models and helicopters. It offers quick programming using jumpers and also setup via the throttle stick in a special mode (manual is included with the controller).

120A power for brushless drives

Reliable output up to 120 A continuous and 140 A peak for demanding setups in airplanes and helicopters.

Wide battery support

Compatibility with LiPo 2–6S (7.4–22.2 V) or 5–18 NiXX cells (6–21.6 V) for flexible power selection.

Integrated BEC 5 V / 6 A

Built-in BEC 5 V / 6 A powers the model electronics and helps simplify installation without an additional external power supply.

Redox EVO 120A is a powerful controller for brushless motors, allowing you to easily tailor the drive behavior to the type of model and battery. Programming is possible either via jumpers with the Redox Evo program card, or directly using the transmitter through the throttle stick.

Programmable modes and functions:

Battery type: NiMH/NiCd or LiPo/LiIon (default)
Low-voltage protection: power reduction (default) or “hard” cutoff
Cutoff thresholds: low/medium/high (LiPo 2.8 V / 3.0 V / 3.2 V per cell; NiMH 0% / 60% / 65% of initial voltage)
Motor timing (Timing): auto/low/high
Start curve: soft (default) or linear
Flight mode (Governor): off (default) or helicopter
Motor rotation direction: standard (default) or reverse
Factory reset of all programmable parameters
Brake: off (coast) / on (instant stop)

Sold as 1 pc controller.

Specifications

Type: Speed controller for brushless motors
Use: Model airplanes and helicopters
Length: 97 mm
Width: 48 mm
Height: 22 mm
Weight: 137 g
Operating voltage: LiPo 2–6S (7.4–22.2 V) or 5–18 NiXX cells (6–21.6 V)
Continuous current: 120 A
Max. peak current: 140 A
BEC: 5 V / 6 A
Connectors: Unterminated wires (to motor) / XT-90 connector (to battery)
Programming: With jumpers (with Redox Evo program card) or via the throttle stick in a special mode

Redox EVO 120A Speed Controller - 1 pc

120A power for brushless drives

Wide battery support

Integrated BEC 5 V / 6 A

Specifications

Similar products