Universal brushless electronic speed controller (ESC) Redox Evo 100A for airplane and helicopter models. It offers quick programming using jumpers, via the Redox Evo program card, or via the throttle stick in a special mode.
100A power for RC airplanes and helicopters
The controller is designed for brushless motors in aircraft models and offers continuous current 100 A and up to 120 A short-term for high load.
Fast and flexible programming
You can set it up using jumpers, via the Redox Evo program card, or directly via the throttle stick in a special programming mode (manual included).
Wide power compatibility and integrated BEC
Power support for LiPo 2–6S or 5–18 NiXX cells. The built-in BEC 5 V / 6 A helps provide stable power to the receiver and servos.
Redox Evo 100A is a powerful controller for brushless motors intended for RC aircraft models. Setup is quick – either via a dedicated program card, or directly from the transmitter using the throttle (programming instructions are included with the controller).
Programmable modes and functions:
- Battery type: NiMH/NiCD or LiPo/LiIon (default)
- Low-voltage protection: power reduction (default) / “hard” cutoff
- Voltage cutoff thresholds: low / medium / high (LiPo 2.8 V / 3.0 V / 3.2 V per cell; NiMH 0% / 60% / 65% of initial voltage)
- Motor timing: auto / low / high
- Start curve: soft (default) / linear
- Governor (flight mode): off (default) / helicopter
- Motor rotation direction: standard (default) / reverse
- Brake: 2 modes (off – coasting / on – instant stop)
- Restore factory settings of all programmable parameters
Sales notice: the price is listed for 1 piece of controller.
Specifications
- Type
- Electronic speed controller (ESC) for brushless motors
- Intended use
- Airplane and helicopter models
- Length
- 81 mm
- Width
- 36 mm
- Height
- 14 mm
- Weight
- 89 g
- Operating voltage
- LiPo 2–6S (7.4–22.2 V) or 5–18 NiXX cells (6–21.6 V)
- Continuous current
- 100 A
- Max short-term current
- 120 A
- BEC
- 5 V / 6 A
- Connectors
- Unterminated wires (to the motor) / XT-90 connector (to the battery)
