Redox Evo 60A speed controller for brushless motors - 1 pc

Universal Redox Evo 60A speed controller for brushless motors, designed for RC airplane and helicopter models. Offers quick programming using jumpers, the Redox Evo programming card, or via the throttle stick in programming mode. Price is for 1 pc.

Quick programming according to the type of power system

The controller can be easily set using jumpers, with the Redox Evo programming card, or via the throttle stick in programming mode. This makes it easy to fine-tune the battery type, voltage limits, brake, timing, and other options.

Universal use for airplanes and helicopters

Redox Evo 60A is intended for RC airplanes and helicopters and also offers a Governor mode for more stable RPM control in helicopter operation.

Wide battery compatibility and practical connectors

Supports LiPo 2–6S as well as NiXX 5–18 cells and is equipped with 3× 3.5 mm gold connectors for the motor and an XT-60 for the battery.

Redox Evo 60A is a universal electronic speed controller (ESC) for brushless motors, designed for reliable operation in airplane and helicopter models. Thanks to its programming options, it is easy to set the controller’s behavior exactly according to the type of power system and flying style.

Programming is possible using jumpers, via the dedicated Redox Evo programming card, or using the throttle stick in service/programming mode (programming instructions are included with the controller).

Programmable modes and settings:

Battery type: NiMH + NiCD / LiPo + LiIon (default)
Low-voltage cutoff method: power reduction (default) / “hard” power cutoff
Voltage cutoff thresholds: low, medium, high (LiPo 2.8 V / 3.0 V / 3.2 V per cell; NiMH 0% / 60% / 65% of initial voltage)
Motor timing: auto / low / high
Start curve: soft (default) / linear
Flight mode (Governor): off (default) / helicopter
Motor rotation direction: standard (default) / reverse
Factory reset of all programmable options
Brake: 2 modes (off – free run / on – immediate stop)